SJ70 Hall Joystick

SJ70 series products are mainly used in cranes, loaders, forklifts, excavators, aerial work platforms, tractors, harvesters.

Keywords:

SJ70 Hall Joystick

Consultations:

  • Introduction
    • Commodity name: SJ70 Hall Joystick

    SJ70 series products are mainly used in cranes, loaders, forklifts, excavators, aerial work platforms, tractors, harvesters.

    SJ70 series products are mainly used in cranes, loaders, forklifts, excavators, aerial work platforms, tractors, harvesters.

    Features: Automatic spring reset, or operation in any direction, angle detection is potentiometer or Hall sensor, with long use Lifetime, a variety of output forms are available.

     

    Operation method

    1A single axis front and rear direction operation

    2AP biaxial cross operating direction

    3AC double operation direction

     

    output signal

    Hall type (supply voltage 5Vdc)

    H51 Single Hall per axis, 0.5~2.5~4.5Vdc voltage output

    H52 Single Hall per axis, 0~2.5~5Vdc voltage output

    H53 Single Hall per axis, 1.25~2.5~3.75Vdc voltage output

    H54 Single Hall per axis, 1.0~2.5~4Vdc voltage output

    H55 Single Hall per axis, 1.15~2.5~3.85Vdc voltage output

    2H51 Redundant Hall per axis, 0.5~2.5~4.5Vdc voltage output

    2H52 Redundant Hall per axis, 0~2.5~5Vdc voltage output

    2H53 Redundant Hall per axis, 1.25~2.5~3.75Vdc voltage output

    2H54 Redundant Hall per axis, 1.0~2.5~4Vdc voltage output

    2H55 Redundant Hall per axis, 1.15~2.5~3.85Vdc voltage output

     

    Upper end of handle

    KM  Safety switch with seesaw button

    KMNN no safety switch and seesaw button

    KMDN has safety switch, no seesaw button

    KMNR has no safety switch and has a seesaw button

     

    Installation method

    A horn connector (A2547HA-14P, 2.54)

    XR9E pair plug-in car connector (XR-9E connector)

     

    The main technical parameters

    Electrical parameters (Hall type)

    voltage 

    5.0±0.5Vdc

    Power supply voltage (rated supply current)

    <11mA (single axis), 22mA (two axes)

    Limit allowable overvoltage

    20Vdc

    Reverse limit allowable voltage

    -10Vdc

    Output voltage linearity error

    <±0.2V

    Mechanical parameters

    Shake angle

    ±20°

    Operation method 

    Spring automatic reset

    Starting force

    5N

    Maximum operating force

    11N

    Limit force

    >300N

    Service life

    >2 million times (potentiometer type) > 5 million times (Hall type)

    weight

    450g

    Environmental parameters

    Operating temperature

    -30℃~+70℃

    Storage temperature

    -40℃~+85℃

    Protection level

    Ip65(Installation panel above)

    Product size chart

    Installation diagram

    Terminal block diagram

Recommend

Relevant products

Welcome to the consultation.