ZX15

ZX15 series resistors are open type, suitable for AC 50Hz, voltage up to 660V and DC voltage to 440V or less for start, speed, brake, discharge and other purposes. Its capacity is 4.6 kW, which is made up of a spiral tubular resistor element wound from an iron-chromium-aluminum alloy strip. Can replace the ZX1 series resistor application.

Specifications

It has the advantages of shockproof and non-breakable. The altitude does not exceed 2000 meters; the ambient temperature does not exceed +40℃ and not lower than -25℃, the average temperature within 24 h does not exceed +35℃. When the temperature is +20℃ to -5℃, the relative humidity of the air is not more than 85%. There are no gases and conductive dust in the surrounding medium that can corrode metals and damage insulation and explosion hazard; there must be areas where rain and snow protection equipment is not filled with water vapor; in areas where there is no severe vibration or bumps.

Order production process

Production Process

Lead time:7-20working days

Mode of payment:100% payment in advance before produce

About drawing:customers’ drawing or our engineer send drawing to customers check

Customer Service Center is one of the most important departments of Heli Automation Instrument Co., Ltd. Her main job is to accept customer comprehensive business consulting, provide technical support to customers; accept, coordinate, handle customer complaints, solve customer's difficult problems; actively communicate with customers, contact, understand customer's feelings and needs, and timely customer information Feedback to all relevant management departments and proper handling.

The Customer Service Center has a Customer Management Department and a Technical Service Department. The customer management department mainly accepts the customer's comprehensive business consulting, and the technical service department mainly provides customers with technical support and solutions for pre-sale, sale and after-sales products. In order to ensure that every customer can get satisfactory service in Heli Automation Instrument Co., Ltd. and maintain good cooperation with the company, we emphasize the pertinence and effectiveness of customer service, and implement the acceptance responsibility system, that is, the customer Every call and every question is responsible for making each other's feelings and understanding. If you have any questions or needs about our products, or have any comments or suggestions about our services, please feel free to contact us and we will do our best to serve you. Your satisfaction is the purpose of our service. The common development of the company and customers is our persistent pursuit.

In the face of the future, all employees of the customer service center will be passionate about warming customers and casting brilliance with service.

Fault check and maintenance

●Mechanical fault check

1. After pulling the switch handle, drive the valve with the handwheel to check whether the hand-electric switch is sensitive and reliable.

2. Check the action and indication of the mechanical opening indicator.

3. If the handwheel does not move and the valve is blocked, the repair valve should be removed. If the valve can be driven by the handwheel, check the electrical part.

4. If the manual operation is normal, there is no interference, and the valve stem does not work, it is necessary to check whether the connection of the valve stem joint is reliable.

●Electrical fault check (check the external controller first, then check the electric device)

1. Check the main power supply and control power supply, relay, fuse and all indicators and switches are normal.

2. Check the motor and replace it if there is a problem.

3. If the micro switch fails, it can be solved by replacing the relevant original.

●Maintenance

It is recommended to perform two routine maintenance or regular maintenance every year.