SJ20 Hall Joystick
Keywords:
SJ20 Hall Joystick
- Introduction
-
- Commodity name: SJ20 Hall Joystick
SJ20 series is mainly used in electro-hydraulic control systems or other electrical control systems of various engineering vehicles.
SJ20 series is mainly used in electro-hydraulic control systems or other electrical control systems of various engineering vehicles.
Product features: single axis front and rear direction operation or single direction operation,friction positioning or spring return, median and starting point can be selected Mechanical locking, selectable potentiometer or contactless Hall angle detection mode, optional direction micro switch (maximum switch Current 10A@30Vdc), can be configured with a variety of models on the upper end.
operating mode
Friction positioning
FCF median feel
FEF starting point with feel
FCL median mechanical lock
FEL starting point mechanical lock
Spring reset
SC0 back to the middle position
SCL back to neutral position, median mechanical lock
SE0 back to the starting point
SEL back to the starting point, starting point mechanical lock
output signalPotentiometer type (supply voltage<36Vdc)
P101 10KΩ center tap potentiometer
Hall type (supply voltage 5Vdc)
H51 0.5~2.5~4.5Vdc voltage output
H52 0~2.5~5Vdc voltage output
H53 1.25~2.5~3.75Vdc voltage output
With conversion circuit
U11 power supply voltage 9~18Vdc, -10V~0V~+10V voltage output
U12 power supply voltage 9~18Vdc, +10V~0V~+10V voltage output
U13 power supply voltage 9~18Vdc, -5V~0V~+5V voltage output
U14 power supply voltage 9~18Vdc, +5V~0V~+5V voltage output
U15 power supply voltage 9~18Vdc, 0V~+10V voltage output
U21 power supply voltage 18~36Vdc, -10V~0V~+10V voltage output
U22 power supply voltage 18~36Vdc, -10V~0V~+10V voltage output
U23 power supply voltage 18~36Vdc, -10V~0V~+10V voltage output
U24 power supply voltage 18~36Vdc, -10V~0V~+10V voltage output
U25 power supply voltage 18~36Vdc, -10V~0V~+10V voltage output
U26 power supply voltage 18~36Vdc, 6V~12V~+18V voltage output
I21 power supply voltage 9~36Vdc, 2-wire 4mA~12mA~20mA current output
I22 power supply voltage 9~36Vdc, 2-wire 20mA~4mA~20mA current output
NA no analog signal output
mirco switch
Ms00 No micro switch
Ms22 With 10A forward and backwaed position micro switch
Ms23 With 10A neutral normally closed and forward and backward position micro switch
Upper end of handleBG BG type handle upper end, top palm operation
HB HB type handle upper end, no button
HBS HBS HBS type handle upper with a button
HBR HBR type handle upper end, top with fascia
Line WayL Wire output (no housing)
A Amper connector
main technical parametersPotentiometer type
supply voltage
<36Vdc
total resistance
10KO(±10%)
Central dead zone angle
±3°
Maximum power
0.2W
hall type
supply voltage
5.0±0.5Vdc
supply current
<11mA(rated supply coltage)
Limit allowable overvoltage
20Vdc
Reverse limit allowable voltage
-10Vdc
Linear error of output voltage
<±0.2V
With conversion circuit
Input voltage
9~18Vdc(U11~U15)
18~36Vdc(U21~U25)
9~36Vdc(I21~I22)Power consumption current
<20mA
Maximum output current
10mA(At standard voltage output)
Micro Switch
load capacity
10A@30Vdc(Resistive load)
Service life
More than 30 million times (mechanical)
100,000 times (electrical)Insulation resistance
>100MΩ (500Vdc insulation resistance meter)
Starting angle
±5°
Mechanical parameter
Shake angle
±37.5°or 75°(single direction)
operating mode
spring return or Friction positioning
Starting force
8N (spring) 16N (friction)
Maximum operating force
18N (spring) 16N (friction)
limit force
>300N
Service life
>2 million potentiometer types>5 million times (hall type)
weight
500g(No upper end)
environment parameter
work temperature
-30℃~+70℃
Storage temperature
-40℃~+85℃
protect level
Ip65(Above the installation panel)

dimension drawing

Installation diagram

Gessmann工业操纵杆―德国制造
V28是一款紧凑型操纵杆。常用于电动液压应用。最新的非接触式霍尔技术确保了长寿命和高可靠性。V28系列具有多种输出和手柄选项,可高度定制。
技术细节可能因配置或应用而异!技术数据如有更改,恕不另行通知!
Combinable / compatible products
undefined
Welcome to the consultation.